HIWIN hg 30 linear bearing is mainly used in mechanical structures with high accuracy requirements. Hiwin hg 30 linear bearing uses rolling steel balls instead of intermediate media between moving and fixed components. Because the rolling steel ball is suitable for small friction coefficient, high-speed movement and high sensitivity, it can meet the working requirements of moving parts, such as tool holders and carriages of machine tools. If the ball is subjected to pre-loading for too long, the force on the ball is too large, resulting in an increase in the resistance of the stent. Hiwin hg 30 linear bearing is mainly used in automatic machinery, such as machine tools, bending machines, laser welding machines imported from Germany, etc. Of course, hiwin hg 30 linear bearing and linear axis are used in conjunction.
Clean hiwin hg 30 linear bearing guide
hiwin hg 30 linear bearing guide rail, linear shaft as one of the core components of the equipment, its function is to play a guiding and supporting role. In order to ensure the machine has a high processing accuracy, it is required that the guide rails and straight lines have high guiding accuracy and good motion stability. In order to allow the machine to work normally and stably, and to ensure the processing quality of the product, daily maintenance of guide rails and linear axes must be carefully done.
During the operation of the equipment, due to the large amount of corrosive dust and fumes produced by the workpiece during processing, these fumes and dust have been deposited on the surface of the hiwin hg 30 linear bearing guide rails and linear shafts for a long period of time. It has a great impact, and will form pits on the surface of the linear axis of the guide rail, which will shorten the service life of the equipment.
Note: Please prepare for cleaning the guide rails-dry cotton cloth, lubricating oil. The guide rail of the engraving machine is divided into linear guide rail and roller guide rail. Cleaning of roller guide rails: Move the beam to the inside, open the end covers on both sides of the machine, find the rails, and wipe the areas where the two rails contact the hiwin hg 30 linear bearing with a dry cotton cloth. Then move the beams and clean the rest.
Clean the linear guide: first move the laser head to the right (or left), find the linear guide, wipe with a dry cotton cloth until it is bright and dust-free, and add a little lubricating oil (use sewing machine oil, do not use machine oil), Push the laser head slowly to the left and right several times to distribute the lubricant evenly.