How to maintain and install iko lm guide?

3,205 Published by admin Sep 29,2021

The iko lm guide is used to support and guide the moving parts to make reciprocating linear motion in a given direction. Depending on the nature of friction, linear motion guides can be divided into sliding friction guides, rolling friction guides, elastic friction guides, fluid friction guides and other types.

iko lm guide cleaning and maintenance:
Guide rails and linear shafts are one of the core components of the equipment, and their function is to play a guiding and supporting role. In order to ensure the high processing accuracy of the machine, the guide rails and straight lines are required to have high guiding accuracy and good movement stability.

During the operation of the equipment, due to the large amount of corrosive dust and smoke generated during the processing of the processed parts, these smoke and dust will be deposited on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment, and will Corrosion points are formed on the surface of the linear axis of the guide rail, which shortens the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the products, the daily maintenance of the guide rail and linear axis must be done carefully.

Note: Please prepare dry cotton cloth and lubricating oil to clean the guide rail. The guide rail of the engraving machine is divided into linear guide rail and roller guide rail. Cleaning the linear guide: first move the laser head to the far right (or left), find the linear guide, wipe it with a dry cotton cloth until it is bright and dust-free, and add a little lubricating oil (sewing machine oil can be used, do not use machine oil) , Slowly push the laser head from side to side several times to distribute the lubricating oil evenly.

Cleaning the roller guide rail: move the beam to the inside, open the end covers on both sides of the machine, find the guide rails, wipe the areas where the guide rails on both sides are in contact with the rollers with a dry cotton cloth, and then move the beam to clean the remaining areas.

Attention to the use of iko lm guide:
iko lm guide is a precision part, so it requires a very cautious attitude when using it. Even if a high-performance linear guide is used, if it is used improperly, the expected performance will not be achieved, and it is easy to damage the linear guide. Therefore, pay attention to the following matters when using linear guides:

Prevent corrosion iko lm guide
When picking up the linear guide directly by hand, wash away the sweat from your hands and apply high-quality mineral oil before operation. Pay special attention to rust prevention during the rainy season and summer.

Keep the environment of iko lm guide clean
Keep the iko lm guide and its surroundings clean even if tiny dust invisible to the naked eye enters the guide rail, it will increase the wear, vibration and noise of the guide rail.

Install iko lm guide carefully
The linear guide should be carefully used and installed, and strong punching is not allowed, the direct hitting of the guide with a hammer is not allowed, and the pressure transmission through the rolling elements is not allowed.

The tools to install the iko lm guide should be appropriate
Use appropriate and accurate installation tools for linear guides. Try to use special tools, and try to avoid using cloth and short fibers.

Welcome to contact me to get the price of iko lm guide!

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: (86)18363031398


How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 2,720

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 2,670

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 2,489

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 2,577

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 2,480

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 2,216

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 2,914

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 2,535

Read more