Cleaning of INA bearing germany

1,301 Published by admin Apr 16,2018

Cleaning of INA bearing germany:
When removing the bearing maintenance, first record the appearance of the INA bearing germany, confirm the residual amount of the lubricant, and then wash the bearings after sampling and checking the lubricant. As a cleaning agent, regular use of gasoline, kerosene.
The removal of the bearing is cleaned with coarse cleaning and fine cleaning. In the container, the bottom of the metal net is placed first, so that the bearing is not directly exposed to the contents of the container. In rough cleaning, if the bearing is rotated with dirt, it will damage the rolling surface of INA bearing and should be noticed. In the crude oil, use the brush to remove grease, glue, generally clean, transfer to fine wash.
Fine wash, is the bearing in the cleaning oil side rotation, while carefully cleaning. In addition, cleaning oil should always be kept clean.
2. Maintenance and judgment of INA bearing germany.
In order to determine whether removed INA bearing germany can be used again, check after wash INA bearings, carefully check the raceway surface, rolling surface, cooperate with the state, the abrasion of the cage, the increase of the bearing clearance, and presence of dimensional precision, abnormal falling damage. The non-separable ball, INA bearing, USES one hand to support the inner circle and the outer ring to confirm whether it is smooth or not.
Conical roller bearings and other separable type INA bearing germany can be inspected separately for rolling body and raceway surface.
The large bearing cannot be rotated by hand, and attention should be taken to check the appearance of rolling body, raceway, retaining frame and retaining surface, and the importance of bearing should be carefully checked.

ina bearing germany
Whether it can be used again is to consider the degree of damage, mechanical properties, importance, operating conditions of the German INA bearing, and the time of the next overhaul. However, if any of the following defects cannot be used again, new INA bearing germany must be replaced:
(a) any cracks or gaps in the inner ring, outer ring, rolling body, and any of the cage;
(b) the ring and rolling body are broken on anyone;
(c) there are significant card injuries on the raceway surface, the baffle, and the rolling body;
(d) the shelf wear is marked, or the rivet is significantly relaxed;
(e) rolling surface, rust, and injury on the rolling body;
(f) there is serious indentation and marking on the rolling surface and rolling body;
(g) there is an obvious creep in the inner diameter or outer diameter of the inner ring;
(h) obvious discoloration caused by heat;
(I) the sealing ring or dust cover of the INA bearing is obviously damaged.

How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 1,833

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 1,840

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 1,684

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 1,959

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 1,639

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 1,595

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 2,266

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 1,790

Read more