search
banner

What are the features of INA linear rail?

1,879 Published by admin Nov 20,2019

Interchangeability of ina linear rail
The slider and guide rail of a linear recirculating roller bearing guide system are matched to each other as a system because the preload requirements of the ina linear rail are very similar. It is also possible to use different combinations of rails and sliders after consultation.
Cylindrical rollers with contact angle X-shaped arrangements can withstand tensile, compressive and lateral loads. Anti-corrosion design Linear recirculating roller bearing guide system RUE..-E can also have anti-corrosion coating Corrotect.

original ina linear rail

If the slider is ordered separately from the rail, then the following will be followed:
Slider and guide rail anti-corrosion protection - suffix RRF.
If supplied as a system:
Slider and guide rail anti-corrosion protection - suffix RRF.
Only rail corrosion protection - suffix RRFT.
If you plan to use Corrotect anti-corrosion coating, please contact us.
The ina linear rail with Corrotect anti-corrosion coating cannot be used with the clamping block RUKS..-D. If you plan to adopt it, please contact us.

germany ina linear rail

Ina linear rail seal
The slider is sealed from all directions by the baffle, the gap seal, the upper seal and the lower double side seal are completely closed. These seals ensure that the rolling elements are not contaminated even in harsh environments.
The double lip seals on both ends of the standard slide ensure that no oil or grease will escape from the system. If the environmental pollution is particularly bad, please contact us.

competitive price ina linear rail

Preload of ina linear rail
The optional preloading level of the linear recirculating roller bearing guide system RUE..-E is that the system achieves optimum rigidity when the preload is only slightly skewed. When the linear recirculating roller bearing guide system is shipped from the factory, it is assembled and the components are grouped and matched.
The preload of the ina linear rail affects the linear guidance system. The higher the preload, the better the rigidity. However, the preload of the ina linear rail affects friction and system life.
Ina linear rail friction
The coefficient of friction depends on the ratio of C/P. For no seal, the load ratio is between C/P=4 and C/P=20: RUE=0.002 to 0.004.
Accuracy grade linear recirculating roller bearing guide system accuracy grade linear recirculating roller bearing guide system with accuracy range from G0 to G3

Welcome to contact me to get the price of linear ball slide!

Contact: Miya
Email: ntn@zyslbearing.com
Skype: ntn@zyslbearing.com
MP/Whatsapp: +8618363031398
Wechat:18363031398

 

How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 1,887

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 1,906

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 1,739

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 2,017

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 1,701

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 1,665

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 2,325

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 1,849

Read more