search
banner

What are the effects of cleanliness on the performance of NTN bearings 6201?

2,834 Published by admin1 Jul 30,2021

What are the effects of cleanliness on the performance of NTN bearings:
The cleanliness of ntn bearing 6201 has a considerable impact on the life of NTN bearings. NTN bearings have carried out special tests for this purpose, and the result is that the difference is several times or even dozens of times. The higher the cleanliness of NTN bearings, the longer the service life. Tests by others have shown that lubricating oils with different cleanliness have a great influence on the service life of ball NTN bearings. Therefore, improving the cleanliness of the lubricating oil can prolong the life of the NTN bearing. In addition, if the lubricating oil contains dirt particles below 10um, the life of the NTN bearing will also increase several times.

ntn bearing 6201

Influence on vibration:
ntn bearing 6201 Test Center's test results show that cleanliness seriously affects the vibration level of NTN bearings, especially the high frequency vibration. NTN bearings with high cleanliness have low vibration velocity values, especially in high frequency bands.
Impact on noise:
Tested on the influence of dust in NTN bearing 6201 grease on noise, and proved that the more dust, the greater the noise.
Influence on lubrication performance:
The decrease in the cleanliness of ntn bearing 6201 not only affects the formation of the lubricating oil film, but also causes the deterioration of the grease and accelerates its aging, thereby affecting the lubricating performance of the grease.

in stock ntn bearing 6201

Generally speaking, when the bearing emits a uniform and continuous "sizzling" sound, everyone should pay attention. This kind of sound is generated by the rotation of the rolling elements in the inner and outer rings, and contains irregular metal vibrations that have nothing to do with the speed. The general performance is that the amount of grease in the bearing is insufficient and should be supplemented. If the equipment is down for too long, especially in the low temperature conditions in winter, the sound of "sizzling" may sometimes be emitted during the operation of the bearing, which is related to the reduction of the radial clearance of the bearing and the reduction of the penetration of the grease. The bearing clearance should be adjusted appropriately, and new grease with a higher penetration degree should be replaced.

ntn bearing 6201
Did you know that poor lubrication of imported bearings is the main factor that can cause premature damage
According to the investigation, poor lubrication is one of the main reasons for the premature damage of imported bearings. The main reasons include: not filling lubricant or lubricating oil in time; not filling lubricant or lubricating oil in place; improper selection of lubricant or lubricating oil; incorrect lubrication method and so on.
Suggestion: Choose the correct lubricant or lubricating oil, and use the correct lubrication filling method.

Welcome to contact me to get the price of ntn bearing 6201!

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563

 

How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 2,662

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 2,591

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 2,435

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 2,536

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 2,404

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 2,163

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 2,873

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 2,476

Read more