search
banner

The difference between double and single direction thrust ball bearings

891 Published by Oct 31,2018

A seat ring that mates with the outer casing.

Type Receptive force is divided into single direction thrust ball bearings and two-way thrust ball bearings. One-way thrust ball bearings that accept one-way axial loads. Two-way thrust ball bearing, thrust ball bearing details: Composition Thrust ball bearing consists of three parts: seat ring, shaft ring and steel ball holder. A shaft ring that cooperates with the shaft. A two-way axial load is acceptable. Two-way thrust ball bearings in which the ring fits the shaft. The seat surface of the seat is spherical and has a self-aligning performance, which can reduce the influence of device errors. Thrust ball bearings cannot accept radial loads and have lower limit speeds.

NTN single direction thrust ball bearings

Use It is only suitable for accepting parts with axial load and low speed. For example, when the crane hook is used and the normal state of the section is verified, the two raceways should be free from peeling damage and severe wear. The balls should be free of crushing and hemp. Point; the frame should be free of deformation, not touching the two raceway washers, and the balls are firmly gathered together. How to install the thrust bearing and the shaft is generally a transition fit. The fit between the race and the bearing bore is generally a clearance fit. The middle collar of the two-way thrust bearing should be fixed on the shaft to prevent rotation relative to the shaft. The device method of the thrust bearing is generally the case where the shaft rotates. Therefore, the cooperation between the inner ring and the shaft is a win-win cooperation, and the cooperation between the outer ring of the bearing and the bearing chamber is a clearance fit.

single direction thrust ball bearings NTN

When installing a single direction thrust ball bearings, check the verticality of the shaft ring and the centerline of the shaft. The method is to fix the dial gauge to the end surface of the casing, so that the contact of the watch top rotates the bearing on the bearing shaft raceway, and observes the dial gauge pointer. In the future, if you want to do business on the earth, there is no Google optimization. survive. If the pointer is yawed, the centerline of the shaft and the axis are not perpendicular. When the case hole is deep, it can also be tested with an extended dial gauge.

single direction thrust ball bearings

There should be two aspects to the eco bag. On the one hand, it can be reused with natural materials. When the thrust bearing device is correct, the seat ring can automatically adapt to the rolling of the rolling elements, ensuring that the rolling elements are located in the upper and lower ring raceways. If the bearing is reversed, not only the bearing will not work properly, but the mating surfaces will be severely worn. Since the difference between the shaft ring and the seat ring is not obvious, the assembly should be extra careful and do not make mistakes. In addition, there should be a gap of 0.2-0.5mm between the seat ring of the thrust bearing and the bearing housing hole to compensate for the error caused by the inaccuracy of the parts processing and the device. When the center of the bearing ring is offset during operation, the gap can be Make sure it is automatically adjusted to prevent friction and normal operation. Otherwise, it will cause severe damage to the bearing.

If you finding single direction thrust ball bearings or other bearings, please contact me any time!

Contact: Ellen
Email: iko@zyslbearing.com
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563

How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 1,715

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 1,724

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 1,550

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 1,813

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 1,492

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 1,475

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 1,967

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 1,627

Read more