search
banner

Click here, learn how to choose the suitable Combined Type Needle Roller Bearing

941 Published by Sep 10,2018

Combined Type Needle Roller Bearing are equipped with thin and long rollers (the length of the roller is 3~10 times the diameter and the diameter is generally not more than 5mm), so the radial structure is compact, and the inner diameter and load capacity are the same as other types of bearings. The smallest diameter, especially suitable for radial support size limited support structure. Needle roller bearings should be combined with bearing rings and applications depending on the application. A needle bearing is a bearing unit that combines a radial needle bearing and a thrust bearing component.

Combined Type Needle Roller Bearing factory

Structure type of Combined Type Needle Roller Bearing
These bearings have a radial needle and thrust full ball, or a thrust ball, or a thrust cylindrical roller, or an angular contact ball, can withstand one-way or two-way axial load. Product accuracy dimensional tolerances and geometric accuracy are in accordance with JB/T8877. The diameters of the needles are 2μm, and the accuracy grade is G2 (GB309). The inner diameter of the inner ring bearing without the inner ring bearing meets the tolerance class F6. The radial clearance of the bearing complies with the specified value of Group 0 of GB/T4604. The special accuracy grade is in accordance with GB/T307.1. The material of the needle roller is GCr15 bearing steel, hardened HRC60-65. The inner and outer rings are made of GCr15 bearing steel and hardened HRC61-65. The cage material is high quality mild steel or reinforced nylon. Special instructions NKIA, NKIB series bearings axial load must not exceed 25% of the radial load. Supports for alternating axial loads must be installed opposite each other. The thrust bearing component must be applied with a preload of 1% of the axially rated static load. When using a plastic cage (suffix TN), continuous operation must not exceed the operating temperature +120 °C. 

Combined Type Needle Roller Bearing manufacturer

The thrust bearing components should be free to move in the housing. Standard GB/T6643-1996 rolling bearing needle roller and thrust cylindrical roller combined bearing dimensions (GB-11) JB/T3122-1991 rolling bearing needle roller bearing and thrust ball combined bearing dimensions (JB-1) JB/T3123-1991 rolling bearing Needle roller bearing and angular contact ball combined bearing dimensions (JB-1) JB/T6644-1993 Rolling bearing needle roller and double-way thrust cylindrical roller combined bearing size and tolerance (JB-3) JB/T8877-2001 rolling bearing needle roller combined bearing Technical conditions (JB-12).

Application field of Combined Type Needle Roller Bearing
The combined needle roller bearing is a bearing unit composed of a combination of a radial needle bearing and a thrust bearing component. The compact needle size and high rotation precision can withstand a high axial load while bearing a certain axial load. And the product structure is diverse, adaptable and easy to install.
Combined needle roller bearings are widely used in various mechanical equipment such as machine tools, metallurgical machinery, textile machinery and printing machinery, and can make the mechanical system design very compact and dexterous.

If you want to buy the Combined Type Needle Roller Bearing or any other bearings,please contact me any time!

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

Read more

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Read more

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

Read more

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

Read more

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

Read more

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

Read more

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

Read more

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

Read more