Do you know the features of stainless steel block bearings?

Stainless steel block bearings are applied by stainless steel outer spherical bearing combined with stainless steel bearing pedestal. The stainless steel outer spherical bearing is actually a variant of the deep groove ball bearing. Its outer ring outer diameter surface is spherical, and the matching into the corresponding concave spherical surface of the bearing seat has the function of centering. Its basic performance is similar to that of deep groove ball bearings, but most of these bearings are used in relatively rough machinery.

The stable steel block bearings are of an integral seat structure. The rigidity of the bearing seat is excellent to avoid deformation of the bearing during installation. The bearing seat is durable under all working conditions. The stainless steel bearing with seat has the following characteristics:

1. The stable steel block bearings have the function of automatic centering: the outer diameter of the bearing and the inner diameter of the bearing seat are spherical, and the two have the function of automatic centering, which can remedy the misalignment of the axis and the deformation of the installation bottom caused by the installation error.

2. The stainless steel block bearings can bear relatively large loads: the internal structure of the outer spherical bearing is the same as the 6200 and 6300 series deep groove ball bearings, so the stainless steel block bearings can not only bear radial loads, but also bear relatively large axial loads; At the same time, the working noise of the bearing is low.

 

3. Long service life of stainless steel block bearings.

4. The sealing performance of stainless steel block bearings is excellent: both sides of the outer spherical bearing contain heat resistant and oil proof rubber seals and steel dust cover combined seals. The dust cover is installed on the outer diameter of the bearing inner ring and rotates with the inner ring, which can reasonably prevent external impurities from entering the bearing, resist external pressure and protect the bearing. This kind of combined seal composed of seal ring and dust cover can prevent dirt, dust and water from entering the bearing, and at the same time prevent the leakage of lubricating grease inside the bearing, so that the bearing can still maintain excellent working performance under extreme working fields.

5. The installation of stainless steel block bearings is simple: sufficient high-quality lubricating grease has been injected into the outer spherical bearing in advance, so it is OK to directly install the stainless steel block bearings on the shaft, so it can prevent harmful substances from entering the bearing during the installation of the bearing unit. The bearing and the bearing seat are precision machined, and the bearing and the bearing seat can be completely interchanged. The bearing can be easily replaced at any time and anywhere.