Let us introduce our high speed deep groove ball bearings for you!

It is characterized by low friction resistance and high speed, and can be used on parts that bear radial load or combined load that acts radially and axially at the same time, and can also be used on parts that bear axial load.

High speed deep groove ball bearings are placed in the raceway grooves on the inner and outer rings to form an arc with a radius slightly larger than the radius of the balls. In addition to radial loads, axial loads in both directions can also be applied. It is suitable for applications with small friction torque, high-speed rotation, low noise and low vibration.

Types of high speed deep groove ball bearings
1. Deep groove ball bearing with dust cover
Generally, it is used in the conditions where separate lubrication is difficult, the lubricating oil circuit is placed and the lubrication check is inconvenient, and the anti-rust and lubrication dual-purpose lithium grease injected into the bearing is 1/4~1/3 of the internal space of the bearing.

2. High speed deep groove ball bearings with sealing ring
Its performance, grease filling, use and bearing with shield bearing are basically the same, the difference is that there is a large gap between the shield and the inner ring, the gap between the sealing lip and the inner ring of the non-contact sealing ring is small, and there is no gap between the sealing lip and the inner ring of the contact sealing ring bearing, the sealing effect is good, but the friction coefficient is increased.

3. There are stop groove and deep groove ball bearings with stop ring
In addition to the radial load function, deep groove ball bearings with stop rings can also limit the axial displacement of the bearing, simplify the structure of the housing and reduce the bearing size. It is generally used in automobiles, tractors and other working parts with small axial loads.

4. There are ball notched high speed deep groove ball bearings

There are notches in the inner and outer rings on one side, which allows more balls to be loaded and increases its radial load capacity. However, due to the small axial load capacity, it cannot operate at high speed. If there is a large axial load, it needs to be used with general deep groove ball bearings.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563