ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more than 20 years' experience on making ball bearings.Making ball bearings,ZYSL factory is the best choose for you!Competitive prices with good quality for you!

The following is the process for making ball bearings:

Ball bearing is a type of rolling bearing. Ball-shaped alloy steel ball is installed between the inner steel ring and the outer steel ring to reduce the friction in the power transmission process and improve the transmission efficiency of the mechanical power. Ball bearings cannot withstand heavy loads and are more common in light industrial machinery. Ball bearings are also called ball bearings.

Making ball bearings Process:
1. Making embryos: Various spherical blanks are produced by various processes.
2. Rough Grinding: Place the globular blank into the grinding disc matching the blank size, two upper and lower two concentric rings of the same size and with the same triangular grinding groove, and add the oil and coarse abrasive; the upper plate rotates and rotates. The disc does not move. The above ball mill is called rough grinding machine. According to need, there may be many ways to roughen.
3. Cleaning: After each rough grinding, the oil and coarse abrasive sticking to the surface of the ball should be cleaned.
4. Fine grinding: The coarsely ground blank is put into a fine grinding mill; low-viscosity oil and fine abrasive are added and ground to a standard size;
5. Polishing: The process is similar to rough grinding and fine grinding.
Ball bearings are generally used in low-load mechanical transmission equipment. Because the bearing area of ​​the ball bearing is small, severe mechanical damage is apt to occur under high-speed operation. Therefore, needle roller bearings are often used in the heavy-duty mechanical transmission to increase the bearing surface, improve the mechanical transmission efficiency and reduce the mechanical load. Sexual injury.
The ball bearing changed the friction mode of the bearing and used rolling friction. This method more effectively reduced the friction phenomenon between bearing surfaces, effectively improved the service life of the fan bearing, and thus extended the service life of the radiator. The disadvantage is that the process is more complicated, leading to higher costs and higher operating noise.

Making ball bearings with customers' customized specifications.All specifications of bearings can be customized in our factory,we can also design the package with your own logo!

If you making ball bearings customized or need any specifications of bearings, please contact me!

Contact:Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398