Do you know the features of radial needle roller and cage assembly?

Radial needle roller and cage assembly AXK according to DIN 5405-2. It consists of a plastic or metal thrust cage and a needle roller with a small axial section.
Radial needle roller and cage assembly can withstand large unidirectional axial forces. Radial loads must be borne by other bearings.
Radial needle roller and cage assembly requires a hardened, ground surface as a raceway. Thrust bearing washer
Radial needle roller and cage assembly AS is a hardened, polished stamping that is suitable for use as a collar or race. They are DIN5405-3 and are suitable for use with the thrust needle roller and cage assembly AXK.

These gaskets are suitable for use in equipment where adjacent components are not hardened but have sufficient stiffness and geometric accuracy.
Thrust needle roller bearing
The thrust needle roller bearing AXW consists of a thrust needle roller and cage assembly AXK and a thrust bearing washer with a centering sleeve. They can be used with drawn cup needle bearings or machined outer ring needle bearings.
The running race of the Radial needle roller and cage assembly must be hardened and ground. Operating temperatures Radial needle roller and cage assembly and needle roller bearings with nylon cages operate from –20 ° C to +120 ° C.

The thrust needle roller cage assembly with a nylon cage is suffixed with a TV. suffix
Radial needle roller and cage assembly suffix of the existing design:
Existing design
TV: The cage is made of fiberglass reinforced nylon 66: standard design
RR: Corrosion-resistant design with Corrotect® coating, special design, please contact me.
Other Radial needle roller and cage assembly products
We also offer a wide range of thrust needle bearings with two raceways in a specific range. Please contact us for more information.