Five issues to be aware of when using the thrust spherical plain bearings.

996 Published by Dec 25,2018

*Working temperature of thrust spherical plain bearings

Thrust spherical plain bearings allowed working temperature is mainly composed of thrust spherical plain bearings is determined by the material of the matching between the sliding surface, especially the type self-lubricating thrust spherical plain bearings of sliding surface, plastic materials at high temperature with the decrease of the carrying capacity of the trend. Such as lubrication type thrust spherical plain bearings when the sliding surface of materials matching for steel/steel, its allowable working temperature depends on the permissible operating temperature of lubricant. But for all type of lubrication and self-lubricating thrust spherical plain bearings, can be in - 30 ℃ ~ 80 ℃ temperature range of use, and keep the right to bear ability.

high quality thrust spherical plain bearings

*Angle of thrust spherical plain bearings

Thrust spherical plain bearings is far better than the Angle adjustable heart of rolling bearing is much more commonly, very suitable for use in supporting parts of the concentricity requirement is not high, the Angle of joint bearing on bearing structure size, type, sealing device and supporting form is different, generally the centripetal range Angle is 3 ° ~ 15 °, angular contact bearing joints Angle range is 2 ° ~ 3 °, thrust spherical plain bearings Angle range is 6 ° ~ 9 °.

thrust spherical plain bearings with high quality

*Thrust spherical plain bearings’ cooperation

In any case, thrust spherical plain bearings chooses cooperation shall be uneven deformation in the ring, its nature and the choice of level must according to the bearing type, such as supporting form and the size of the load working conditions to decide.

Loading and unloading of thrust spherical plain bearings should follow the following principles, namely the force imposed by the assembly and disassembly can't directly pass through the spherical sliding surface. In addition, should use auxiliary loading and unloading tools, such as sleeve, dismounter, etc., the loading and unloading force exerted by the outside world is directly and evenly applied to the matching ring, or use the auxiliary method such as heating to load and unload without load.

high precision thrust spherical plain bearings

*The installation of thrust spherical plain bearings

When assembling thrust spherical plain bearings series, it is necessary to give special attention to outer ring segmentation position below. In order to avoid the load acting directly on the segmentation surface, the segmentation surface should be maintained in a right Angle with the corresponding direction.

thrust spherical plain bearings with high precision

*Thrust spherical plain bearings lubrication

When the applied load and produced are very hour, the speed of the swinging motion to the oil type thrust spherical plain bearings can operate in the case of no lubrication. However, regular oil and fat supplementation is generally necessary. During the initial installation and operation, it is recommended that the lubrication cycle should be moderately shortened.

No oil type thrust spherical plain bearings can be used without lubrication circumstances. However, if before operation to join lithium soap base grease, thrust spherical plain bearings service life will be extended more. If dimensional infuse grease around the bearing, thrust spherical plain bearings will be more effective protection of dust and the invasion of foreign bodies.

If you need thrust spherical plain bearings or other bearings, please contact me any time!

Contact: Miya
MP/Whatsapp: +8618363031398

How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 1,707

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 1,720

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 1,547

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 1,810

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 1,488

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 1,469

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 1,908

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 1,623

Read more