Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil) vehicles, machining equipment, and mechanical transmission assemblies for factory production lines.
All balls bearings components
All balls bearings mainly consist of four basic components: ball, inner ring, outer ring and retainer (cage or retainer) as shown. General industrial ball bearings meet AISI 52100 standards. Balls and rings are usually made of high-chrome steel with a Rockwell C-scale hardness of approximately 61-65.

All balls bearings performance
The hardness of the retainer is lower than that of the ball and the ring. The material of the retainer is metal (such as: medium carbon steel, aluminum alloy) or non-metal (such as: Teflon, PTEF, polymer material). Rolling bearings have lower rotational frictional resistance than journal bearings, so at the same rotational speed, the temperature due to friction will be lower.

All balls bearings are generally used in low-load mechanical transmission equipment. Because the bearing area of ​​the ball bearing is small, serious mechanical damage is apt to occur under high-speed operation. Therefore, the needle roller bearing is often used in the heavy-duty mechanical transmission to increase the bearing surface and improve the mechanical transmission efficiency, and at the same time reduce the Mechanical damage.

All balls bearings change the friction of the bearings and use rolling friction. This method reduces the friction between the bearing surfaces more effectively, improves the service life of the fan bearings, and extends the service life of the radiator. The disadvantage is that the process is more complex, the cost is increased, and higher operating noise is also introduced.

We supply all balls bearings and roller bearings with ready stocks, if you are interested in, please contact me, we will do the best for you!

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398