What’s the bronze sintered layer ptfe sleeve bearing?

1,233 Published by Apr 10,2019

ptfe sleeve bearing also called DU bushing, dry bushing, DU bearing,teflon bushing,PTFE coated bearing,SF-1 oilless bearing,PTFE liner metal polymer composite bearing and PTFE based plain bearing. This type of ptfe sleeve bearing takes PTFE layer as sliding layer which makes products can perform very well under dry condition or oil condition.
Material Structure of ptfe sleeve bearing
These materiais consist of metal backing bonded to a porous bronze sintered layer with PTFE based polymer bearing layer.The metal backing provides mechanical strength, while the bronze sintered layer provides a strong mechanical bonding between the backing and the bearing lining,the PTFE based polymer offers exceptional low friction even under dry condition.
high quality ptfe sleeve bearing
ptfe sleeve bearing Design
Depending upon application requirements, PVB01 Series self lubricating bearing can be produced in many shapes and sizes from inner diameters 6mm to more than 300mm. The type of loading applied to the ptfe sleeve bearing will determine which bearing shape is required.
Available sizes of ptfe sleeve bearing:
Standard sized parts for a wide range of bearing products with basic dimensions (inner diameter, outer diameter, length, etc.) according to international standards are available. Special bearings with additional functionality can be produced to customer specifications and requirements
high precision ptfe sleeve bearing
Advantages of ptfe sleeve bearing
Improved energy efficiency with the low friction performance of PTFE-enriched overlay;
Extended service life with a high wear-resistant bronze layer;
Zero maintenance as self-lubricating bearings can operate dry without grease;
Greater reliability than bimetallic bearings by avoiding potential shaft/bearing seizure under boundary lubricated conditions and frequent stop/start operation;
Compact, lightweight designs with thin-wall bearing construction;
Reduced noise with no metal-to-metal contact between the bearing and the shaft;
Quick, simple assembly without expensive mounting tools.

If you need the ptfe sleeve bearing or other bearings, please contact me any time!

Contact: Miya
MP/Whatsapp: +8618363031398


How to remove and install radial spherical bearings?

How to remove and install radial spherical bearings? The following information show you the metho...

Do you like ? 1,726

Read more

What is the structure of the slewing plummer blocks?

The slewing plummer blocks is a large and extra large bearing housing that can accept comprehensi...

Do you like ? 1,730

Read more

How to adjust the installation clearance of self roller bearings?

Self roller bearings have double row rollers, the outer ring has one shared spherical raceway, an...

Do you like ? 1,558

Read more

How to choose the suitable ball bearing units from different designs?

According to the different requirements of the bearing and ball bearing units, the classification...

Do you like ? 1,825

Read more

Features of all balls bearings

Common equipment using all balls bearings are: motor shafts, transmission parts for light (civil)...

Do you like ? 1,503

Read more

What is the effect of high temperature on imperial ball bearings?

High temperature impact on imperial ball bearings If the lubrication or installation is not appro...

Do you like ? 1,481

Read more

ZYSL factory making ball bearings with customers’ customized specifications.

ZYSL factory making ball bearings with customers' customized specifications.Our company has more ...

Do you like ? 2,057

Read more

These problems should be noticed on the using of radial thrust bearing.

Radial thrust bearing is divided into thrust ball bearing and thrust roller bearing. Radial thrus...

Do you like ? 1,637

Read more